This is kernel for our y300 and g510.
Features:
-3.4.2 kernel version
-New Freq Table - 19Mhz / 65Mhz / 98Mhz / 196Mhz / 320Mhz / 480Mhz / 700Mhz / 1008Mhz / [1046Mhz - y300] / [1209Mhz - g510]
-Underclock
-Dynamic fsync v2
-Increase available ram (depends on version which you choose)
-CPU voltage control VDD sys interface (only for y300)
-Schedulers : fiops / noop / dedline / cfq / sio / sioplus / row / vr / zen / fifo
-Governors : interactive / conservative / userspace / powersave / ondemand / ondemandX / preformance / smartassv2 / smartassH3 / smartmax / badass / asswax / wheatley / dancedance / intellidemand / lulzactive / hyper / lionheart
-TCP congestion control algorithms: westwood / vegas / veno / cubic / reno / bic / htcp / lp / scalable / yeah / llinois / hybla / highspeed
-TCP westwood as default
-Optimized AES and SHA1 routines
-LowMemoryKiller management of not killable processes
-Timer slack controller
-CK3 Tweaks
-Optimized SLUB memory allocator
-Dynamic management of the minimal timer slack value during suspend/resume
-Compile with -O3
-ARM flags optimization
-Linaro 4.6.2
-FRandom
-Swap support
-Lowered swappiness 60->45
-Zram (?)
-usb OTG
-Dynamic dirty page writebacks
-Doubled readahead values
-Fast Charge (untested but i think it need some fixes)
-A little bit overclocked gpu [gpu freq steps : 192Mhz / 245Mhz / 320mhz]
-Different compresion type
-Disabled Gentle Fair Sleepers for better UI performance
-and much more ... (look at the changelog)
Download:
CeXstel v0.62 for CM10:
NEW CeXstel v0.62 (407mb) [29/03/14]
Předchozí verze
CeXstel v0.61 (407mb)
CeXstel v0.60 (407mb)
CeXstel v0.59 (407mb)
v0.58 (407MB ram)
v0.58 (~400MB ram)
v0.58 (393MB ram)
CeXstel v0.61 for CM10.1:
NEW CeXstel v0.62 (407mb) [29/03/14]
Předchozí verze
CeXstel v0.61 (407mb)
CeXstel v0.60 (407mb)
CeXstel v0.59 (407mb)
v0.58 (407MB ram)
v0.58 (~400MB ram)
v0.58 (393MB ram)
CeXstel v0.61 for Stock:
NEW CeXstel v0.62 (407mb) [29/03/14]
Předchozí verze
CeXstel v0.61 (407mb)
CeXstel v0.60 (407mb)
CeXstel v0.59 (407mb)
v0.58 (407MB ram)
v0.58 (~400MB ram)
v0.58 (393MB ram)
From v0.58 version the images aren't tested by me.
I only check does it bootable.
Not fully working builds :
All builds here have not working video decoding/encoding with stock video app.
To get working video you can try use vlc player etc. ...
CM10.1:
v0.58 (425MB ram)
CM10:
v0.58 (425MB ram)
STOCK:
v0.58 (425MB ram)
Changelogs:
- Spoiler: zobrazit obsah
- v0.62
-support for usb OTG
-downgrade of kernel from 3.4.4 to 3.4.2
-new scheduler : sioplus
-fix zram(?)
-ARM: add support for bit sliced AES using NEON instructions
-deadline patch
-crypto: create generic version of ablk_helper
v0.61
-update of kernel from 3.4.3 to 3.4.4
-block/partitions: optimize memory allocation in check_partition()
-writeback: fix writeback cache thrashing
-cpufreq: Optimize cpufreq_frequency_table_verify()
-xsched: Optimize build_sched_domains() for saving first SD node for a cpu
-deadline optimization
v0.60
-update of kernel from 3.4.2 to 3.4.3
-msm:qdsp5:Fix to avoid kernel memory disclosure in audio_mvs_ioctl
-qdsp5: memset stack buffer allocation.
-msm: qdsp5: Update code to avoid access userspace data
-msm:qdsp5: Checks to avoid buffer overflow.
v0.59
-msm: audio: initialize the structure before sending to user space
-qdsp5: audio: Add support for adsp dump mechanism
-msm: audio: qdsp5: Initialize wait queue before creating acdb thread
-add NEON accelerated XOR implementation
-ARM: move VFP init to an earlier boot stage
-ARM: Perform the creation of procfs node for VFP later
-timer: optimize apply_slack()
-new cpu grovernor : ondemandX
-some other changes ...
v0.58
-add support for kernel mode NEON
-new cpu governor : smartassH3
-new cpu freq for y300 : 1046Mhz
-make VM_MAX_READAHEAD a kernel parameter
-limit default readahead size for small devices
-some other extra changes in readahead
-loopback: set default mtu to 64K
-other minor changes ...
v0.57
-update of kernel from 3.4.1 to 3.4.2
-Compile with -O3
-ARM flags optimization
-back to linearo 4.6.2
-deleted CIFS support
-fix backlight buttons on CM
v0.56
-new cpu governors : intellidemand, lulzactive, hyper, lionheart
-vibrator intensity sysfs
-deleted some patch from v0.52
v0.55
-fix problem with video (?)
-four variations of kernel
-deleted ARM RWSEM algorithm
-deleted all process from "do not killable list"
v0.54
-lowered minimal cpu freq : 19Mhz
-better support for VPN over IPsec
-new freq step for gpu - 245Mhz
v0.53
-CK3 Tweaks
-optimized ARM RWSEM algorithm
-lowered swappiness 60->45
-fix lags
v0.52 (big update)
-timer slack controller
-dynamic management of the minimal timer slack value during suspend/resume
-extra free kbytes tunable
-optimized SLUB memory allocator
-softirq: reduce latencies
-changes in ramdisk
-lowMemoryKiller management of not killable processes
-change initial readahead window size calculation
v0.5
-optimized AES and SHA1 routines
-tweak vm dirty ratios
-new schedulers : vr / zen / fifo
-fix booting on g510
-deleted 1104Mhz
v0.49
-new cpu governors : badass, asswax, dancedance, wheatley
-fix booting on g510
-deleted 1305Mhz
v0.48
-tcp congestion control : yeah, llinois, hybla, highspeed
-tcp westwood as default
-new scheduler : row
-underclock for all devices (like g510 etc.)
-add overclock for g510 (1104mhz & 1305mhz) [untested]
-fixed radio fm
v0.47
-some changes in memory mapping [experimental]
-increase available ram from 393mb to 403 mb
v0.46
- dynamic dirty page writebacks
- tcp congestion control : scalable & lp
- some other changes
v0.45
underclock (min = 65mhz)
- dynamic fsync v2
- doubled readahead values
- tcp congestion control : bic & htcp
- zram
v0.43
-TCP congestion control algorithms: westwood ,vegas ,veno ,cubic, reno
-fixed dancing screen on g510
v0.42
-update of kernel from 3.4 to 3.4.1
-Disabled Gentle Fair Sleepers for better UI performance
-CPU voltage control VDD sys interface
v0.4
-CIFS
-Linaro 4.8.2
-FRandom
-new scheduler : fiops
-different compresion type
-small size now only ~4.4mb
-Fast Charge (untested but i think it need some fixes)
-temporarily deleted cpu oc
v0.30
-fixed "milk screen" (thanks dazozzo)
-improved stability
-fixed bluetooth
-fixed some random reboots
v0.25
-a little bit overclocked gpu (from 300mhz to 320mhz)
v0.21
-swap support
v0.2
-smaller screen issuse
-improved stability
-a bit better performance
-only two schedulers (sorry for this I will add more in next version)
-cleanup source
v0.1
-Initial Release
Bug list:
-zram on stock
-19Mhz need some fixes (?)
-video on 420mb ram version
Screeny:
- Spoiler: zobrazit obsah
Odkaz na
Modaco
